An LTO drive can read tapes at most one or two generations older than itself, and LTO-10 drives cannot read older tapes at all, so every new generation leaves older cartridges with fewer drives that can read them. If your library holds LTO-4, LTO-5 or LTO-6 tapes, the drives that read them are no longer made, and each upgrade cycle makes the problem worse.

LTO generations at a glance
| Generation | Introduced | Native capacity | Read by drives |
|---|---|---|---|
| LTO-1 | 2000 | 100 GB | LTO-1, LTO-2, LTO-3 |
| LTO-2 | 2003 | 200 GB | LTO-2, LTO-3, LTO-4 |
| LTO-3 | 2005 | 400 GB | LTO-3, LTO-4, LTO-5 |
| LTO-4 | 2007 | 800 GB | LTO-4, LTO-5, LTO-6 |
| LTO-5 | 2010 | 1.5 TB | LTO-5, LTO-6, LTO-7 |
| LTO-6 | 2012 | 2.5 TB | LTO-6, LTO-7 |
| LTO-7 | 2015 | 6 TB | LTO-7, LTO-8 |
| LTO-8 | 2017 | 12 TB | LTO-8, LTO-9 |
| LTO-9 | 2021 | 18 TB | LTO-9 only (LTO-10 drives cannot read it) |
| LTO-10 | 2025 | 30 TB or 40 TB | LTO-10 only |
Up to LTO-7, a drive reads two generations back and writes one back. LTO-8 and LTO-9 drives read and write only one generation back. LTO-10, launched in 2025, is the first generation that cannot read the one before it at all: its drives use a new servo format and accept only LTO-10 cartridges. Native capacity is shown; vendors also quote larger compressed figures.
Why old LTO tapes get stranded
- The drive window closes. An LTO-5 tape needs an LTO-5, LTO-6 or LTO-7 drive. None of those generations is sold new any more, and an LTO-8 or LTO-9 drive cannot read it.
- The software that wrote the tape matters. Archive and backup applications often write in their own formats. Without the same application, or a tool that understands its format, the files on the tape cannot be restored even with a working drive.
- Catalogs go missing. The database that says which file is on which cartridge is often lost, out of date or tied to a retired system, so a library holds cartridges known only by a label.
- Encryption keys get lost. LTO-4 and later support hardware encryption. A tape written with encryption cannot be read without its key.
Signs it is time to migrate
- Your newest drive is at least two generations ahead of your oldest tapes.
- Only one or two working drives can still read part of the library.
- The archive software that wrote the tapes is out of support or no longer installed.
- Nobody can say with confidence what is on the cartridges.
How Meta Martis migrates LTO
Most collections hold three or four LTO generations on the same shelf, and no single current drive can read them all. We supply the mix of drives that matches what is actually there, covering LTO-3 through LTO-9, and read the tape formats written by the common archive systems.
- Checksummed twice. Every file is checksummed coming off the tape and again when it lands.
- A verified count. You receive a verified count of what moved, plus a list of anything that did not.
Files are indexed with on-premises AI and land on storage you own, with a protected copy in Meta8 Private Cloud. Where a videotape migration runs at the same time, both streams are coordinated under one project plan.
Every project starts by establishing what is on the tapes and what to migrate first.
Questions
Can an LTO-9 drive read LTO-6 tapes?
No. An LTO-9 drive reads LTO-9 and LTO-8 tapes only. LTO-6 tapes need an LTO-6 or LTO-7 drive.
Can an LTO-10 drive read LTO-9 tapes?
No. LTO-10 drives read only LTO-10 cartridges. Moving to LTO-10 means migrating the existing tapes, not just swapping drives.
Can an LTO-8 drive read LTO-6 tapes?
No. LTO-8 drives read LTO-8 and LTO-7 tapes only.
Which drive reads LTO-5 tapes?
LTO-5, LTO-6 and LTO-7 drives.
Which LTO generations can you read?
LTO-3 through LTO-9.
How do we know everything moved?
You receive a verified count of what moved and a list of anything that did not.
What if we no longer have the software that wrote the tapes?
A working drive is not enough on its own; the tape format written by the archive or backup software also has to be read. We read the tape formats written by the common archive systems. Tell us which software wrote the tapes in the Free Archive Assessment and we will establish what can be recovered.
What if the tapes are encrypted?
Hardware-encrypted LTO tapes can only be read with their keys. Locating the keys is part of planning the migration.
Send us your LTO generations, cartridge counts and archive software in the Free Archive Assessment, and we will plan the drive mix.
